smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7-sp1] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (Adv. Format)
Device Model: WDC WD10EARS-00Y5B1
Serial Number: [No Information Found]
Firmware Version: 80.0
Device is: In smartctl database [for details use: -P show]
ATA Version is: [No Information Found]
ATA Standard is: [No Information Found]
Local Time is: Mon Jul 22 10:06:44 2013 IST
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
Error SMART Thresholds Read failed: Function not implemented
Smartctl: SMART Read Thresholds failed.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 219) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 196 196 --- Pre-fail Always - 37191
3 Spin_Up_Time 0x0027 129 121 --- Pre-fail Always - 6533
4 Start_Stop_Count 0x0032 092 092 --- Old_age Always - 8140
5 Reallocated_Sector_Ct 0x0033 200 200 --- Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 --- Old_age Always - 0
9 Power_On_Hours 0x0032 081 081 --- Old_age Always - 13924
10 Spin_Retry_Count 0x0032 100 100 --- Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 --- Old_age Always - 0
12 Power_Cycle_Count 0x0032 092 092 --- Old_age Always - 8084
192 Power-Off_Retract_Count 0x0032 190 190 --- Old_age Always - 7810
193 Load_Cycle_Count 0x0032 193 193 --- Old_age Always - 21658
194 Temperature_Celsius 0x0022 107 098 --- Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 --- Old_age Always - 0
197 Current_Pending_Sector 0x0032 192 192 --- Old_age Always - 1378
198 Offline_Uncorrectable 0x0030 200 194 --- Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 --- Old_age Always - 3
200 Multi_Zone_Error_Rate 0x0008 200 143 --- Old_age Offline - 67
Error SMART Error Log Read failed: Function not implemented
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Function not implemented
Smartctl: SMART Self Test Log Read Failed
Error SMART Read Selective Self-Test Log failed: Function not implemented
Smartctl: SMART Selective Self Test Log Read Failed