Sign in with
Sign up | Sign in
Your question
Solved

No Post or Beeps after CPU upgrade

Last response: in CPUs
Share
July 23, 2013 11:53:09 AM

I have an old ECS 945gct-m3 and i decided to upgrade its celeron processor to an intel core2duo e6700. After i installed it the computer did not boot. I went back and installed the celeron and it booted like normal. is there something wrong with the core2duo or is there something else i need to fix? thanks in advadnce

More about : post beeps cpu upgrade

Best solution

a c 117 à CPUs
July 23, 2013 12:54:54 PM

According to EliteGroup that CPU should work - found here under CPU tab http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail... (for rev. 3, if you have a different revision the CPU support list may be different) . There should be nothing else needed to be done other than putting the CPU in and the heatsink on (with fresh thermal compound). Might I inquire if the e6700 was purchased used or new and is there exchange available
Share
a b à CPUs
July 23, 2013 1:19:45 PM

did you try resetting the bios
m
0
l
!