- Jan 11, 2013
- 491
- 0
- 10,960
Hi, i'm currently running an GA-990FXA-UD3 motherboard from gigabyte.
as of recently i switched out my CPU cooler and wanted to tweak the voltages to allow for higher overclocks.
The BIOS allows for +0.025 voltage at a time. Recently the voltage settings have started to act weird. On the bottom is my default voltage. Above is the vcore. When adding +0.025V the voltage increases way over 1.4 volt for some reason.
I've only changed the eocp prifle to PROFILE1 nothing else.
Any advice is appreciated! As i don't want to tweak anything before i know for sure that voltage is correct.
PS: Decreasing the voltage puts me lower than 1.4 volt.
as of recently i switched out my CPU cooler and wanted to tweak the voltages to allow for higher overclocks.
The BIOS allows for +0.025 voltage at a time. Recently the voltage settings have started to act weird. On the bottom is my default voltage. Above is the vcore. When adding +0.025V the voltage increases way over 1.4 volt for some reason.
I've only changed the eocp prifle to PROFILE1 nothing else.
Any advice is appreciated! As i don't want to tweak anything before i know for sure that voltage is correct.
PS: Decreasing the voltage puts me lower than 1.4 volt.
Facebook
Twitter
Instagram