Solved
Fitting concerns with G.skill + Phantek
Palidion
I'm planning to get this RAM:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231568
With this CPU air cooler:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835709001
On this Mobo:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157293
In this case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147107
The question is, will the Phantek fit on that board over that RAM without sticking beyond the case door line?? I hadn't even considered this until I watched a review on the phantek and realized I might have a problem on my hands since I have a mid-tower. In the video I watched:
http://www.youtube.com/watch?v=mR1kmhirI7Y
He literally has his 140mm fan up against his RAM module and it causes the fan to push out away from the motherboard a fair bit. I don't know if I can do that on my case and still close the door. O.o Actual height of RAM would be good, too. I haven't bought the RAM modules yet, and I was told the Phantek is one of the best, so I'm really hoping they are compatible.
Please help O.o
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231568
With this CPU air cooler:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835709001
On this Mobo:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157293
In this case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147107
The question is, will the Phantek fit on that board over that RAM without sticking beyond the case door line?? I hadn't even considered this until I watched a review on the phantek and realized I might have a problem on my hands since I have a mid-tower. In the video I watched:
http://www.youtube.com/watch?v=mR1kmhirI7Y
He literally has his 140mm fan up against his RAM module and it causes the fan to push out away from the motherboard a fair bit. I don't know if I can do that on my case and still close the door. O.o Actual height of RAM would be good, too. I haven't bought the RAM modules yet, and I was told the Phantek is one of the best, so I'm really hoping they are compatible.
Please help O.o
7
answers
Last reply
Best Answer
More about fitting concerns skill phantek
-
I think you will be ok.
But... why not just avoid the issue and buy a low profile kit in the first place?
This kit has the same specs and is actually cheaper. more so with the 10% promo code:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231606 - Best answer
-
Tradesman1 said:
Wow. Nice job on finding that picture.
Thanks for the help everyone -
Tradesman1 said:
Um, that link doesn't seem to work anymore. What exactly was it?
Related Resources
Ask a new question
Read More
RAM
CPUs
Cooling
Memory
G.SKILL
Cases
Related Resources
- solved will the corsair h110 cpu cooler be able to fit in the Phantek Enthoo Luxe full tower case
- solved Will a Phantek PH-TC14PE CPU Cooler Fit Properly on a EVGA Z97 FTW Mobo?
- solved Will the phantek ph-tc14pe fit in my case?
- solved Can you fit the Phantek PH-TC14PE in Corsair 300R?
- solved Will Phantek PH-TC14PE fit inside my NZXT-H440 case?
- solved Fitting a Corsair H100i in an NZXT Source 210 case with GSkill Ripjaws \ ASUS M5A97 mobo
- solved fitting a Corsair H100i in a Corsair 300r with an asrock 970 extreme 3 r2.0 with Gskill Ripjaws Ram modules
- solved G.Skill Trident 16gb 2400 hz 1.6v problems fitting
- Concerns about graphics card not fitting into tower
- psu fitting concerns
- Will 200mm fan and 240m watercooler fit in top of Phantek Enthoo Pro?
- solved Concerned about fitting of components
- Phantek or Noctura CPU cooler fit?
- solved is Phanteks PH-TC14PE compatible with g.skill snipers and gigabyte ga-990fxa-ud3???!
- solved Will Phanteks Cooler clear these Gskill memory sticks?
See also
- solved Will Gskill Ripjaws fit in a Z170 Gigabyte gaming 3 but with a big air cooler?
- solved GSkill Ripjaws X 8GB Fit in a carbide 200r with hyper 212 evo?
- solved Will the G.Skill Trident Z Series fit in my build?
- solved Best Air Cooler that will fit G.Skill Trident Z Ram?
- solved Will G-Skill Trident Fit?