Asrock mo/brd - Model G31M-VS2
Using a known good psu that is 20 pin on the 24 pin connector on the board.
Also tried a 24 pin psu I believe to be good.
Just added a new cpu to this board. It's a dual quad conroe kentsfield.
There was a dual core cpu in this board and the voltages in the bios were all correct.
After the changes, the bios is showing the 5 volts as being only 0.61 volts.
What is going on with this thing ?
thanks for any help.
Using a known good psu that is 20 pin on the 24 pin connector on the board.
Also tried a 24 pin psu I believe to be good.
Just added a new cpu to this board. It's a dual quad conroe kentsfield.
There was a dual core cpu in this board and the voltages in the bios were all correct.
After the changes, the bios is showing the 5 volts as being only 0.61 volts.
What is going on with this thing ?
thanks for any help.