My original monitor: HP w2338h Black 23" 5ms Full HD 1080P HDMI
http://www.newegg.com/Product/Product.aspx?Item=N82E16824176109
New monitor: BenQ Gaming XL2720T Black 27" 1ms
http://www.newegg.com/Product/Product.aspx?Item=N82E16824014344
Motherboard: ASRock Z87 Extreme6 LGA 1150 Intel Z87 HDMI
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157371
CPU: Intel Core i5-4670K Haswell 3.4GHz LGA 1150
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116899
GPU: EVGA SuperClocked w/ ACX Cooling 02G-P4-2774-KR GeForce GTX 770 2GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130921
Will be gaming on the BENQ at 120hz/1080p.
Id like to use a dual monitor setup (only for web browsing/watching hulu while I game etc), is it possible to do this allowing the BENQ monitor to run at 120hz while the other (HP) simultaneously runs at the 60hz? Performance hit?
If so how should I physically wire it? Should I just use a dual-link dvi cable for the BENQ and a regular HDMI cable to the HP?
Additionally: Is it possible/is it a good idea to: maybe run the HP monitor using the onboard motherboard/haswell HDMI output; leaving the GTX 770 to run ONLY the BENQ? Performance?
If not should I go ahead a disable the onboard/haswell hdmi in BIOs?
Thanks for your time, I hope this isn't too confusing
http://www.newegg.com/Product/Product.aspx?Item=N82E16824176109
New monitor: BenQ Gaming XL2720T Black 27" 1ms
http://www.newegg.com/Product/Product.aspx?Item=N82E16824014344
Motherboard: ASRock Z87 Extreme6 LGA 1150 Intel Z87 HDMI
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157371
CPU: Intel Core i5-4670K Haswell 3.4GHz LGA 1150
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116899
GPU: EVGA SuperClocked w/ ACX Cooling 02G-P4-2774-KR GeForce GTX 770 2GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130921
Will be gaming on the BENQ at 120hz/1080p.
Id like to use a dual monitor setup (only for web browsing/watching hulu while I game etc), is it possible to do this allowing the BENQ monitor to run at 120hz while the other (HP) simultaneously runs at the 60hz? Performance hit?
If so how should I physically wire it? Should I just use a dual-link dvi cable for the BENQ and a regular HDMI cable to the HP?
Additionally: Is it possible/is it a good idea to: maybe run the HP monitor using the onboard motherboard/haswell HDMI output; leaving the GTX 770 to run ONLY the BENQ? Performance?
If not should I go ahead a disable the onboard/haswell hdmi in BIOs?
Thanks for your time, I hope this isn't too confusing