My Gigabyte GA-78LMT-S2P motherboard is giving me beep codes

dude807

Distinguished
Jun 19, 2013
215
0
18,680
For the past week my Gigabyte GA-78LMT-S2P has been giving me beep codes during start up and sometimes just randomly during the day. After start up it beeps while loading my desktop. Then sometimes it beeps rapidly for 4 seconds. Sometimes the screen freezes for 10-15 seconds and then it beeps and continues whatever i was doing. Usually while on the internet. And then other times it'll just beep once then 10-30 minutes later beep again. Some days it doesnt beep at all!
I looked in the manual and it doesnt say much about beep codes and i'm just confused all around. Please help me! Here are my specs just in case you might need them.
Processor: AMD FX-4100 Zambezi 4.0GHz Socket AM3+ 95W Six-Core Desktop Processor FD6100WMGUSBX
Graphics card: AMD Radeon HD 7850 Graphics Card
Eyefinity, DirectX11 Support
1X HDMI, 2X DVi, 2X Display port Available
15% Overclock Available if desired
Hard Drive: Seagate Barracuda 1.5TB 7200 RPM SATA 3.0GB/s3.5
32Mb Cache
Operating System: Windows 7
RAM: Skill Ripjaws X Series 12gb 240-Pin DDR3 1600 MHz (PC3 128000) Desktop Memory
CAS 9 Latency
Equipped with Advanced Aluminum Heat-Dispersing Shield
motherboard: GIGABYTE GA-78LMT-S2P AM3+ AMD 760G Micro ATX AMD Motherboard
Case: Raidmax tornado.

Thank you for your help!

Update: The sound may not be a beep. It's hard to determine. It almost sound like it could be the hard drive scraping on something for a quick second. I really don't know. That's why i'm coming to you guys! XD
 

dude807

Distinguished
Jun 19, 2013
215
0
18,680


How would I do that? Could you explain please? :]
 

dude807

Distinguished
Jun 19, 2013
215
0
18,680


Okay. I found the "dram configuration" spot, but what's mc voltage? And you suggested I change the DRam by .6 and mc voltage by .10? Correct?
 

dude807

Distinguished
Jun 19, 2013
215
0
18,680


In dram configuration it said nothing about voltage, mostly timing and latency. But under dram configuration there's system voltage control
North bridge volt control, south bridge volt control, ddr3 voltage control, CPU NB vid control, normal CPU vcore and corneal cpu vcore NB. Are any of these what I'm looking for?