Asrock N68C-GS FX + Noctua NH-U9B SE2

Chaosian

Honorable
Jul 28, 2013
1
0
10,510
Voila j'aimerai savoir si je peut enlever le carre bleu autour du proccesseur sans aucun risque et je ne sais pas ce quil y a en dessous (peut etre des vis ^^) j'ai vu que c'était compatible avec le ventirad mais je voulais avoir votre avis Merci
 
Solution
I translated this, and from what I understand, if you need to remove the blue retention bracket, you can. They are held on by plastic push pins.

To remove the blue plastic square, flip the motherboard around to the back and there should some plastic clips sticking out around the processor socket. Push in the center of the plastic clips and it should go inward. flip motherboard back again, and pull the plastic part out, then you can squeeze the plastic teeth out of the back of the motherboard.

znaand.jpg

computer_nugget2

Distinguished
I translated this, and from what I understand, if you need to remove the blue retention bracket, you can. They are held on by plastic push pins.

To remove the blue plastic square, flip the motherboard around to the back and there should some plastic clips sticking out around the processor socket. Push in the center of the plastic clips and it should go inward. flip motherboard back again, and pull the plastic part out, then you can squeeze the plastic teeth out of the back of the motherboard.

znaand.jpg
 
Solution