Sabertooth Z87 won't boot 3d hdd

fitter1964 · Jul 28, 2013

System is up and running windows 7 pro. boot drive Cosair 180GB GT second hdd WD 320 sata Blue boots OK. But when I try to add a third drive same as the second drive it won't boot and I can't get into the bios, and it is upto date. The drives are good and have been formated.

Tradesman1 · Jul 28, 2013

Have you tried it with a known good cable and in a known good SATA port

fitter1964 · Jul 29, 2013

Today I moved my SATA cables round SSD port 1 SATA HDD port 2 every thing is OK. But when I plug in the 3rd SATA HDD it will post and the red LED comes on. Goes to LOGO and then nothing can't even get into the BIOS at startup. Booth of the HDD are formated did them with a BLAC X USB docking station from Thermaltake. I even moved my power cables around, and that did not help ether.

fitter1964 · Jul 30, 2013

Well I've come to the conclusion that the MB dose not like this HDD, for it was working with my P6X58D MB I will just remove it.
So Moderator you can close this post.

Search

Sabertooth Z87 won't boot 3d hdd

fitter1964

Distinguished

Tradesman1

Tradesman1

Legenda in Aeternum

fitter1964

Distinguished

fitter1964

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page