Hi, I've just put together my first PC Build and although everything was fine at first I have run into an issue with my two front Chassis Fans.
They are both PWM Akasa Apache's and are both plugged into the same mobo (ASUS P8Z77-V LX) header with an Akasa PWM splitter. The same configuration applies to the two rear fans and the second mobo Chassis Fan header.
At first they spun up when the system started and ran at a visually steady speed. The BIOS only showed N/A for their RPM. It did however pick up the Cooler Master CPU fan RPM.
Since installing the various ASUS drivers from the disk the front Chassis Fans have ceased to spin. The rear ones, however, continue as before.
The BIOS now shows the RPM for the front fans at 200 and in red, which is wrong because they aren't spinning at all, only occasionally twitching. The BIOS continues to display N/A for the rear fans, which as I mentioned still function fine.
This issue has me perplexed, any ideas as to what may have gone wrong?
They are both PWM Akasa Apache's and are both plugged into the same mobo (ASUS P8Z77-V LX) header with an Akasa PWM splitter. The same configuration applies to the two rear fans and the second mobo Chassis Fan header.
At first they spun up when the system started and ran at a visually steady speed. The BIOS only showed N/A for their RPM. It did however pick up the Cooler Master CPU fan RPM.
Since installing the various ASUS drivers from the disk the front Chassis Fans have ceased to spin. The rear ones, however, continue as before.
The BIOS now shows the RPM for the front fans at 200 and in red, which is wrong because they aren't spinning at all, only occasionally twitching. The BIOS continues to display N/A for the rear fans, which as I mentioned still function fine.
This issue has me perplexed, any ideas as to what may have gone wrong?
Facebook
Twitter
Instagram