Motherboard wont boot to bios in new build.

Adventac

Honorable
Jul 29, 2013
3
0
10,510
Hey everyone I recently purchased all the parts I would need to build my own computer. Though when I got it all together the motherboard would not boot to bios.

Build specs:

CPU-I7-3770k
Motherboard-gigabyte GA-z77x-ud3h
GPU- gigabyte gtx 770 4gb
Memory- Corsair vengence 1600hz
PowerSupply- EVGA supernova NEX750g
CPU cooler- corsair h60


The mother board shows a light on its power button when plugged in and will send some power to the fans(Not enough to fully turn) when I click it but then it stops everything gives me a error code blip that I can't really make out but it resembles a 6 or possibly a 3 if anything at all. the M and B bios flash quickly at the same time as the error code. Basically that all happens the same time I click the power on the motherboard.

I've even tried it with a single stick of ram and tried all the slots. I've literally tried everything I could think of. Even unhooking everything but the essentials and nothing happens just this weird blip of power then nothing.

Has anyone here run into this problem before? Or have had similar problems? I've literally tried everything I know and Can't figure this out. Any help on the matter would be very much appreciated. Thx in advanced.
 

Adventac

Honorable
Jul 29, 2013
3
0
10,510


Already have it sitting on the static resistant bag on it's box. Everything but CPU My h60 cooler, ram and psu are disconnected and separate. I've also cleared the cmos. It just has a quick 1 second burst of power and a jumbled up error code that doesn't make sense on the boards error led's. I don't think it's the power supply since it's fan actually turns on but when the motherboard stops so does the psu's fan.