Does anyone have experience with the Sentey Optimus Extreme Division GS 6000R case? There are molex connectors labeled "Fan1" and "Power" coming from the front panel. I believe they are for the fan controller and the power button respectively. They have the plastic molex casing that is normally for four pin molex connectors but the Fan1 has two "female" (hollow) pins and the Power has two "male" pins. Am I supposed to just connect them in series with the other fan molex connectors which in turn are connected to the PSU? Anyone who can help me with this cable problem, I would greatly appreciate their help.
Thanks.
Thanks.