Yes should be no problem, if you have trouble setting up the sticks try this:
1. Set DRAM Frequency to DDR3-1600
2. Set CPU-NB Frequency to 2400MHz (DDR3-1600 / 2 = 800MHz, then x 3) CPU-NB Frequency should always be 3X DRAM bus frequency
3. Set HT Link Frequency to 2400MHz
4. Set timings to tCL 9 - tRCD 9 - tRP 9 - tRAS 24, or whatever your memory is rated for.
5. Set DRAM Voltage to 1.50V, or whatever your memory is rated for.
6. Most CPUs will need a CPU-NB Voltage boost of +0.10V, so if your default is 1.10V, set it to 1.20V.
Let me know how it goes