Need some opinions on my setup

kid_darknesssss

Honorable
Feb 1, 2013
45
0
10,540
Hi guys,

first and foremost, I've been all through all the faq threads etc, for those of you that would suggest that. I really just want an opinion on which way to go.

I'm ready to liquid cool my system. (3770k fyi) I was going to go with a mid-level system, like an XSPC kit. But my one thought, is that I dont want to have to worry too much about maintenance. I'm just not good at keeping a schedule.

For that one reason I was considering going with a closed loop H110. I know it wont cool as well, but it is cheaper (not the biggest thing) and would be no maintenance beyond cleaning the dust off the rad once in a while.

I'm not planning on going very high with an OC, but i just want some cooler temps for peace of mind. Should I still spend the extra on a real water kit, or should i "settle" for the H110?
 

kid_darknesssss

Honorable
Feb 1, 2013
45
0
10,540



I have the Hyper 212 evo now, with 2 fans, and its not all that great. Its better than stock, but im sure the H110 would be way better.

But my point is that I want better cooling, but if im not going to be diligent about flushing my system every 6 months or whatever, should I go with a closed loop system since its lower maintenance and way cheaper. ($109 on amazon plus I have a $35 credit, vs. $200+ for full water cooling system from XSPC w/ 280mm RAD & compression fittings)
 

kid_darknesssss

Honorable
Feb 1, 2013
45
0
10,540


Its def much better than stock, but I don't dare go any higher than 4.4 OC on it. It runs about 72-75*C at 4.4 full load. Going to 4.6 OC puts in into the low 80's, and 4.8 is mid 90's aka GTFO. I'd like to go to 4.6, but more importantly i just want it to stay ice cold.

FWIW: I used Noctua thermal paste applied in correct amount. Its not my first rodeo with thermal paste or installing coolers, but it is my first rodeo with any kind of liquid cooling.