There you go. Starting to look a lot nicer. Your case doesn't have the rubber grommets like mine so the holes will never look as good. You also have a mATX board so there is more distance for them to travel. Only other area that can really be improved on is the wires up by the case fan in the upper left. You have a long power wire running along the length of the board, and that bundle of I'm not sure on the other side. Remember that case fans are square so you can turn it so the wires drop straight down on whatever side will help. To be honest you'll probably want to unscrew the motherboard and run the wire behind it. You'll need to remove any cards, but everything else should be ok. Make sure the wire doesn't get caught on a...