I have recently encountered a bit of a problem with my BRAND NEW GIGABYTE F2A85XM-D3H (rev 1.1) motherboard. I am using it for my computer build. I have all the main supplies setup inside of it, but I cannot access ANYTHING listed in the manual (CMOS Setup, Boot Menu, QFlash, etc.)... Usually the POST screen flashes for a split second so I cannot read anything if it comes up at all. My keyboard (Micro Innovations USB) is unresponsive but the num-lock is on. Any ideas? I have just put it together and need to boot from a USB DVD-ROM
My Specifications: 1x8GB Corsair Vengance LP DDR3 RAM 250GB Seagate Barracuda 7200.8 SATA-1 Hard Drive GIGABYTE F2A85XM-D3H (rev 1.1) motherboard AMD A-Series Socket FM2 64-bit Processor Diablotek DA Series 600W PSU Rosewill FBM-01 Dual Fans MicroATX Mini Tower Computer Case HL-DT-ST DVD-ROM GDR8084N USB Device
Thank you! ~DrRogueTech
Last replyBest Answer
More aboutgigabyte f2a85xm d3h enter cmos setup
Hi, Try clearing the CMOS (unplug the power cord and remove the CMOS battery for few minutes or use the CLRCMOS jumper cap, if available).