This is my first computer build and i have been having alot of trouble. First i got it all built and into the case but when i turned my computer on everything would power up but i wouldnt get display or post beep and then i couldn't turn the computer back off by holding down the power button. Then i did some searching on this website to figure out what i could do and i made a breadboard but when i turned it on i think i messed something up. I touched the screwdriver i was using to short the computer to the other pins and now i cant get it to turn on that way again and finally came to toms hardware for help!
My components are:
GIGABYTE GA-A55M-DS2 FM1 AMD A55
AMD A8-3870K Unlocked Llano 3.0GHz Radeon 6550
Kingston HyperX Blu 4GB 240-Pin DDR3 SDRAM DDR3 1333
CORSAIR CX600M 600W ATX12V
Seagate Barracuda ST500DM002 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s
Im a big nub so please help!
My components are:
GIGABYTE GA-A55M-DS2 FM1 AMD A55
AMD A8-3870K Unlocked Llano 3.0GHz Radeon 6550
Kingston HyperX Blu 4GB 240-Pin DDR3 SDRAM DDR3 1333
CORSAIR CX600M 600W ATX12V
Seagate Barracuda ST500DM002 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s
Im a big nub so please help!