- Jul 31, 2013
- 58
- 0
- 10,630
Hello again!
So at the moment i have 2x:
http://www.coolermaster.com/product/Detail/cooling/case-fan/sickleflow-120-2000rpm-blue-led.html
and this:
http://www.noctua.at/main.php?show=productview&products_id=34&lng=en
and as far as im aware, they all have only 3pin connectors and a 4pin molex adaptor?
My new motherboard will only have 4pin connectors as shown in this picture on top little bit right:
https://www.google.fi/search?as_st=y&tbm=isch&hl=fi&as_q=sabertooth+990fx+rev+2&as_epq=&as_oq=&as_eq=&cr=&as_sitesearch=&safe=images&tbs=isz:lt,islt:xga&biw=1600&bih=799&sei=jMIGUt7EOOG04ASu5YHQBw#facrc=_&imgdii=_&imgrc=kz3HKp3-9As84M%3A%3B4_8b-CznQ4iWaM%3Bhttp%253A%252F%252Frog.asus.com%252Fwp-content%252Fuploads%252F2012%252F08%252Fsabertooth-990fx-r2-overview1.jpg%3Bhttp%253A%252F%252Frog.asus.com%252Fforum%252Fshowthread.php%253F21745-Sabertooth-990FX-R2.0-Unboxing-amp-Spec-Overview%3B1674%3B2000
And as far as it looks like, the molex doesnt fit in that or am i totally wrong?
And if im right, does this let me controll all of the fans if i buy 2:
http://www.jimms.fi/tuote/FANMATE2
EDIT:
Ok im fully confused from all the info im reading from the internet again but did u just go full retarded? does the motherboard 4pin connector mean exactly the molex 4pin? So i dont need the zalman controller at all and ill just use the adaptors and plug them into the motherboards 4pins?
So at the moment i have 2x:
http://www.coolermaster.com/product/Detail/cooling/case-fan/sickleflow-120-2000rpm-blue-led.html
and this:
http://www.noctua.at/main.php?show=productview&products_id=34&lng=en
and as far as im aware, they all have only 3pin connectors and a 4pin molex adaptor?
My new motherboard will only have 4pin connectors as shown in this picture on top little bit right:
https://www.google.fi/search?as_st=y&tbm=isch&hl=fi&as_q=sabertooth+990fx+rev+2&as_epq=&as_oq=&as_eq=&cr=&as_sitesearch=&safe=images&tbs=isz:lt,islt:xga&biw=1600&bih=799&sei=jMIGUt7EOOG04ASu5YHQBw#facrc=_&imgdii=_&imgrc=kz3HKp3-9As84M%3A%3B4_8b-CznQ4iWaM%3Bhttp%253A%252F%252Frog.asus.com%252Fwp-content%252Fuploads%252F2012%252F08%252Fsabertooth-990fx-r2-overview1.jpg%3Bhttp%253A%252F%252Frog.asus.com%252Fforum%252Fshowthread.php%253F21745-Sabertooth-990FX-R2.0-Unboxing-amp-Spec-Overview%3B1674%3B2000
And as far as it looks like, the molex doesnt fit in that or am i totally wrong?
And if im right, does this let me controll all of the fans if i buy 2:
http://www.jimms.fi/tuote/FANMATE2
EDIT:
Ok im fully confused from all the info im reading from the internet again but did u just go full retarded? does the motherboard 4pin connector mean exactly the molex 4pin? So i dont need the zalman controller at all and ill just use the adaptors and plug them into the motherboards 4pins?
Facebook
Twitter
Instagram