Sign in with
Sign up | Sign in
Your question
Solved

Urgent Build Question, Thermal compound spill

Last response: in Systems
Share
a b V Motherboard
August 10, 2013 9:12:16 PM

I spilled a bit of Tuniq Tx-2 (non conductive it says) on my motherboard around the pins for the cpu fan. i cleaned it up the best i could but there is a small smudge that will not budge. will it cause any problems?

More about : urgent build question thermal compound spill

a b V Motherboard
August 10, 2013 9:53:30 PM

if it is,as advertised,non conductive you have nothing to worry about. a qtip and isopropanol should clean it up.
m
0
l

Best solution

a c 559 V Motherboard
August 10, 2013 10:08:25 PM

Use a hair dryer (but not on the hot) for drying it.
Share
a b V Motherboard
August 10, 2013 11:50:54 PM

well, its going to be a while before i power up..it will probably dry when i get up in the morning? (and the stuff that's left is almost too dry to get at)
m
0
l
!