Sign in with
Sign up | Sign in
Your question

[BEGGING FOR HELP! :( ] new build , no signal to monitor

Tags:
  • no signal
  • Graphics
  • first build
  • Monitors
Last response: in Graphics & Displays
Share
August 11, 2013 1:03:38 AM

I bought the the following a week ago
MSI h87- G43 motherboard
Core i5 4430 Processor
WDC 500 GB HDD
21.5" LED AOC Monitor
4Gb 1600 MHz DDR3 ram

The Vga is a MSI GTS450 DDR5 and the PSU is Cooler Master 460W. These are the same ones i have been having and i assembled all the parts correctly. Whenever i turn on my PC it says no signal but the fans, HDD everything turns on and i can hear the Windows 7 log on sound too. But when i restart it from the restart button everything works fine and the monitor shows up the display. This is really worrying me because if i turn of the pc now and turn it on again in another 3 hours i have to go through the same issue. I already reseated the ram, changed cables, cleared the CMOS and did everything i know. It still doesnt seem to work out ! anyone know what the issue might be ? please help !
p.s : when i connect to my on board vga the issue doesnt show up, so my guesses are the vga or the psu, vga was working well till i bought all these. im not sure what the fault is.. Please help me

Note: i bought a new PSU , Raidmax 500W but still the problems occurs

More about : begging build signal monitor

August 12, 2013 8:22:55 PM

I had a similar problem and couldn't figure it out. So I re-seated my ram into it's slots on the motherboard and it worked fine.
m
0
l
!