Corsair H110 & HAF 932

Toggle sidebar Toggle sidebar
burdenbound

burdenbound

Splendid
Aug 9, 2011
3,225
0
22,960
Does any one know if the corsair H110 280mm water cooler will install fine in the coolermaster HAF 932 case?

The case is designed for a 240mm but I'm wondering is any body has tried these two parts together and if it worked out fine or not.

Thank you.
 
Solution
burdenbound
Just got my case in the other day, I was able to connect the radiator directly to the top using 3 small case screws I had laying around. They were small enough to fit through the holes that are present at the top of the case and hold the radiator.

I was only able to get 3 holes to line up using this method but it was secure enough that I am satisfied. I gave a good tug on the radiator and it never moved in any way so I believe it's safe.

Wanted to go ahead and post my experience with it in case any body else is looking into a similar setup. I might come along later and post a couple pictures of it as well. Now it's time to bump up the overclock on the CPU.
Sort by date Sort by votes
burdenbound

burdenbound

Splendid
Aug 9, 2011
3,225
0
22,960


Yeah I've seen that thread, was hoping I could do it without zip ties and without 120mm fans. I'm trying to keep just the 2 140mm's it comes with. In one of the pictures that posted on that thread it looks like the top of the case has holes spread out far enough for 140mm fans but I'm not sure.
 
Upvote 0 Downvote
burdenbound

burdenbound

Splendid
Aug 9, 2011
3,225
0
22,960
Just got my case in the other day, I was able to connect the radiator directly to the top using 3 small case screws I had laying around. They were small enough to fit through the holes that are present at the top of the case and hold the radiator.

I was only able to get 3 holes to line up using this method but it was secure enough that I am satisfied. I gave a good tug on the radiator and it never moved in any way so I believe it's safe.

Wanted to go ahead and post my experience with it in case any body else is looking into a similar setup. I might come along later and post a couple pictures of it as well. Now it's time to bump up the overclock on the CPU.
 
Upvote 0 Downvote
Solution
burdenbound

burdenbound

Splendid
Aug 9, 2011
3,225
0
22,960
Here is a picture of how I mounted the cooler inside the case, hope this helps any one else debating whether they want to use these two parts together. The radiator is really tight and secure even though there are only three points of contact.

2rhx.jpg
[/URL] Uploaded with ImageShack.us[/img]


If you really want to secure more points you will need to do a little drilling to expand the holes in certain spots, this method allows you to mount without needing any customizing to the case or cooler.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom