Sign in with
Sign up | Sign in
Your question

ASUS GeForce GTX650 OC DirectCU "NO SIGNAL" Pls HELP <- third time asking

Last response: in Graphics & Displays
Share
August 14, 2013 1:32:08 PM


My System!

ASRock M3N78D FX
OCZ Powerstream 520W
AMD Phenom II x4 965 BE
RAM Patriot Viper 1x8GB DDr3 1600MHz
GPU OLD/NEW ... Sapphire Radeon HD 4850 Toxic / Asus GeForce GTX 650 OC DirectCU

I installed the new gpu it said no signal.. I've read around the forums that I should put my old gpu in and remove drivers install the new ones.. and do similar shit in bios... I did the MBO thing with replacing my battery and similar.. didn't help.. I tried other connectors.. I am sure that the GPU's were seated right.. I can find the problem. I tried reconnecting other components. like RAM .. HDD .. SSD ... nothing worked.. just nothing...


I just enable my speaker on MBO ... It beeps 8 times and before it beeps 8 times it goes like 1 or 2 beep .. can't really count cuz it goes like tthis BEE-BEEP ... not beep beep beep beep... but like BE BEEP
August 14, 2013 1:52:33 PM

First off, please take a deep breath. Make sure one last time everything is connected properly. The Pcie cables may look connected but aren't always connected. Make sure that you plug the monitor cable into the card, not the MB and that the monitor is on the proper input.
m
0
l
August 14, 2013 2:02:52 PM

BranFlake5 said:
First off, please take a deep breath. Make sure one last time everything is connected properly. The Pcie cables may look connected but aren't always connected. Make sure that you plug the monitor cable into the card, not the MB and that the monitor is on the proper input.


i did it a million of times.. and i checked is everything compatiable and it is.. just don't tell me that the gpu is broken :(  god i would suicide
m
0
l
Related resources
August 14, 2013 4:17:30 PM

1. Did you remove the AMD drivers when you change the GPUs?
2. If not, plug the AMD card back in, remove the driver and shut off insert the NVIDIA card.
3. Can you boot into safe mode or is it just a blank screen displaying no signal?
4. Check this out http://www.tomshardware.com/forum/262730-31-breadboardi...
5. What is your PSU? A 400W is a minimum and is assume to be a good PSU.
m
0
l
August 14, 2013 4:20:40 PM

vinhn said:
1. Did you remove the AMD drivers when you change the GPUs?
2. If not, plug the AMD card back in, remove the driver and shut off insert the NVIDIA card.
3. Can you boot into safe mode or is it just a blank screen displaying no signal?
4. Check this out http://www.tomshardware.com/forum/262730-31-breadboardi...
5. What is your PSU? A 400W is a minimum and is assume to be a good PSU.


Drivers removed.. I get black screen right away it gets no signal at all.. my psu is 520w i already told ya that
m
0
l
!