Hyper 212x thermal paste method

aiko1905 · Aug 15, 2013

Hi guys

As a beginner computer user this is the first time I'm building my own computer myself.

I have some question mark on my mind. I read many ideas and suggestions on the internet but i still dont clear result which way is better to use thermal paste.

I have amd fx6300 cpu.

according to that website below the X shape way is the best solition. Is the test trustable ?

http://www.pugetsystems.com/labs/articles/Thermal-Paste-Application-Techniques-170/

aiko1905 · Aug 15, 2013

should i use two line methods on pipes. small thin lines.. this the only way know looks reliable to me.

chriscornell · Aug 15, 2013

I usually put a dot (roughly pea-sized) in the middle of the cpu-heatsink and spread it towards the edges with a piece of cardboard.

Whether or not this is the professional way to do it - i don't know, but my 2500K @ 4,0Ghz gets around 51c under full load.

I've built around 100-150 systems, and I've always applied thermal paste like this.

Guest · Aug 15, 2013

Proven and tested, a single small pee-size goo of T.I.M. is sufficient.

What is the best way to apply thermal grease?
- Part 1: http://www.hardwaresecrets.com/article/What-is-the-Best-Way-to-Apply-Thermal-Grease-Part-1/1303/11
- Part 2: http://www.hardwaresecrets.com/printpage/What-is-the-Best-Way-to-Apply-Thermal-Grease-Part-2/1392

aiko1905 · Aug 15, 2013

I'm gonna try dot way. I hope it will work correctly thx.

Guest · Aug 15, 2013

aiko1905 :

If you fasten the heatsink properly to the mobo, sitting square on the CPU, there is absolutely no reason why it should not.

Good luck.

Search

Hyper 212x thermal paste method

aiko1905

Distinguished

Guest

aiko1905

Distinguished

chriscornell

Distinguished

Guest

Guest

aiko1905

Distinguished

Guest

Guest

TRENDING THREADS

Latest posts

Moderators online

Share this page