Sign in with
Sign up | Sign in
Your question
Solved

Did my ram run as it should be?

Last response: in Memory
Share
August 17, 2013 9:54:32 AM

Hi so i just fenished build my pc 1h ago everyting work so i buyed this ram http://www.ncix.com/products/?sku=70136&vpn=KHX1600C9D3... and i would like to know if it run at 1600mhz and in dual mode cpu-z screen http://imageshack.us/a/img825/2716/cl9a.png thanks in advance

More about : ram run

August 17, 2013 10:00:21 AM

It is running at 1600MHz, double data rate so 800MHz in CPU-Z times 2 = 1600MHz. Your timings are a little loose though. You will need to tighten them manually in BIOS.

Your RAM is designed to run at 9-9-9-27 @ 1.65v.
August 17, 2013 10:02:48 AM

so what i need to do exactly for the biopart im okay just need to know what i need to do thanks
Related resources
a b } Memory
August 17, 2013 10:03:54 AM

Try enabling the XMP profile to get ya timings up or just set manually
August 17, 2013 10:28:31 AM

AMD doesn't use XMP profiles.

Go into Advanced part of BIOS and look for RAM Timings.
August 17, 2013 10:31:48 AM

hi thanks for reply i have an asus bios so i go in advanced i have it then i look for ram timing and a type 9 9 9 27 in case right?
August 17, 2013 10:44:03 AM

What model motherboard do you have?
August 17, 2013 12:01:10 PM

It's in the Ai Tweaker tab of your BIOS. Look for Memory Frequency and set to 1600MHz, and DRAM Timing Control, go in there set these settings to these values:

CAS Latency (CL) - 9
RAS to CAS Delay (trCD) - 9
RAS Precharge (tRP)- 9
Cycle Time (tRAS) - 27

Then back in AI Tweaker, scroll down and make sure DRAM Voltage is set to 1.65v.
August 17, 2013 2:39:52 PM

Almost, in the 2nd BIOS picture, that setting you changed from 39 to 27 needs to go back on AUTO. The one that gets changed to 27 is the one set at 28 currently (DRAM RAS ACT Time) should be 27. Other than that, you're good to go.
August 17, 2013 3:04:47 PM

Wow thanks for you help now all is set as how you told me to do only 1 thing why we raised to 11 to 9 did we lose ram power or we gained more? also did my ram is on dual mode
August 17, 2013 3:18:14 PM

In terms of timings, lower is faster. CL9 is better than CL11. In terms of frequency faster is better, 1600MHz is faster than 1333MHz.

August 17, 2013 3:30:57 PM

nice and last questions! is im running on dual for the ram ?

Best solution

August 17, 2013 4:07:58 PM
Share

Yessir you are running dual channel! [:stickg1:2]
!