New build display issue

siberiac · Aug 19, 2013

I'm having an issue getting my new build to display onto a monitor. I just built it tonight and everything powers on great, but the monitor doesn't detect anything from the motherboard.

My Specs:
CPU: Intel Core i5-4670 3.4GHz Quad-Core Processor

Asus Z87-A ATX LGA1150 Motherboard
Corsair Dominator Platinum 8GB (2 x 4GB) DDR3-2133 Memory

Western Digital Caviar Black 1TB 3.5" 7200RPM Internal Hard Drive

Asus GeForce GTX 760 2GB Video Card

Corsair Builder 600W 80 PLUS Certified ATX12V Power Supply

BMOSound · Aug 20, 2013

Where do you have the video cable plugged into. The motherboard or video card?

CDdude55 · Aug 20, 2013

Try different troubleshooting methods, make sure everything is seated properly (all power cords and heatsinks are attached), try booting with only a single stick of memory. You can also try booting the system outside the case just to rule out a shortage.

Also have you tried booting using the integrated graphics instead of through the video card?

smorizio · Aug 20, 2013

As person posted most new mb have the ipgpu as first video output. Check that the eight pin power plug on the edge of the mb is plugged in.

siberiac · Aug 20, 2013

smorizio :

I've fixed that now, the 8 pin was not connected, but now the cpu_led is red

BMOSound · Aug 20, 2013

Found this that might work:

1. Unplug the system from the wall and disable the power switch on the back of your PSU
2. Remove your CMOS battery
3. Wait for an 30mins to an hour
4. Plug in your powercord, flip the PSU switch
5. Turn on your system

Also if you unplug the power cord from the back again you might have to do this method again. Might not be the same problem as yours but worth a try

Search

New build display issue

siberiac

Honorable

BMOSound

BMOSound

Distinguished

CDdude55

Distinguished

smorizio

Titan

siberiac

Honorable

BMOSound

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page