Solved

PSU Failing? how to read CPUID HWMonitor

Hi everyone,
I have been having problems over the last few days and I think I may have a failing PSU but not sure how to read the CPUID HWMonitor.

Could someone point me in the right direction:
1) is the CPUID HWMonitor the right test approach?
2) what do you make other HWMonitor results (particularly the Power Package ranging from 8W to 109 W and the 12 v measuring at 8.9v)
3) Is the PSU likely?

Info below. Thanks all.

Problems - slow starts, some software corruption when windows did a repair, pixelating screen (if this is the correct term when tiny lines appear/disappear on the screen and flicker), one of my cooling fans is noisy today

Setup:
Motherboard MSI Big Bang Fuzion LGA 1156 Intel P55 / Lucid Hydra 200 ATX Intel Motherboard
Processor Intel I5-750
GPU 2 x Saphire 4890 Vapor X 1GB DDR5
RAM 8gb OCZ OCZ3P1600lv
Heat Sink ARCTIC COOLING Freezer 7 Pro Rev.2 92mm CPU Fan
Hard Drive Samsung HD502HJ
Case Cooler Master Storm Scout
SSD Corsair Force 3
PSU PC Power and Cooling Silencer Mk II 950W High Performance 80PLUS Silver

HW Monitor test results

Hardware monitor Fintek F71889F
Voltage 0 3.26 Volts [0xCC] (+3.3V)
Voltage 1 1.21 Volts [0x97] (CPU VCORE)
Voltage 2 1.74 Volts [0x6D] (VIN2)
Voltage 3 1.41 Volts [0x78] (VIN3)
Voltage 4 5.80 Volts [0x8A] (+5V)
Voltage 5 8.89 Volts [0x65] (+12V)
Voltage 6 1.15 Volts [0x48] (VIN6)
Voltage 7 3.30 Volts [0xCE] (VSB3V)
Voltage 8 3.31 Volts [0xCF] (VBAT)
...
Hardware monitor ATI I/O
Temperature 0 65°C (149°F) [0x41] (TMPIN0)

Hardware monitor AMD ADL
Voltage 0 1.05 Volts [0x41D] (VIN0)
Temperature 0 66°C (149°F) [0x41] (TMPIN0)

Hardware monitor ATI I/O
Temperature 0 64°C (147°F) [0x40] (TMPIN0)
...
Power - Packages - ranges from 8.9W - 109.9W
1 answer Last reply Best Answer
More about psu failing read cpuid hwmonitor
  1. Best answer
    Try reading your 12v with a Multimeter, that will give you a more accurate reading
Ask a new question

Read More

How To Components