H220 on CM Storm Stryker(rad at the bottom)
- Thread starter ry010
- Start date
Solution
Sn1992-1361850
Dignified
- Jul 13, 2013
- 4,360
- 0
- 16,960
i wouls say for best results try this best orientation which is very well tested just do the following things
1.h220 at top in exhaust position
2. the rear fan (buy a high airflow akasa viper fan ) in intake position to feed the rad with fresh air
3. front and bottom fans as intake
4. side fan exhaust to take out all the hot air from graphics card
1.h220 at top in exhaust position
2. the rear fan (buy a high airflow akasa viper fan ) in intake position to feed the rad with fresh air
3. front and bottom fans as intake
4. side fan exhaust to take out all the hot air from graphics card
Thanks Sn1992! I thought that generally the rear fans should be exhaust as much as possible. will that setup be considered as a positive airflow setup?
lastly if I place the h220 as exhaust will that mean that the fans are on top or at the bottom? thinking about it the fans will be on top doing a pull setup? is that correct?
I plan on replacing the stock h220 fans with noctua f12s and the case fans to corsair AFs. will that be good enough? I appreciate the assistance. thanks!
Sn1992-1361850
Dignified
- Jul 13, 2013
- 4,360
- 0
- 16,960
Look u wud get best results with fans at the bottom of the radiator
And that fans are really good fans
Dont frget to pik a solution to ur thread
And that fans are really good fans
Dont frget to pik a solution to ur thread
Facebook
Twitter
Instagram