How long should 3g router Ethernet Cable be?

lady_bug

Honorable
Aug 25, 2013
10
0
10,510
I would like to buy a 5 or 7-meter ethernet cable that I can connect to my desktop and 3g router. I don't want to use my computer upstairs but want to place my 3g router there for better signal. The problem is, the Ethernet cable of TP-Link Router is only 1 meter in length. Is having 5 or 7 meter ethernet cable ok for 3g router?
view.php
[/img]
 
Solution
yes its fine. if you are able to get what is referred to CAT5e or cat5 enhance it will allow for the fastest signal your network connection from your computer to the router with the least amount of signal loss.

but since standard cat5 cable 100mbs transfer rate @ 100 meters and your router can hit a maximum of 150mbs - that would also be fine for a short run.

The_Doctor

Honorable
May 19, 2013
233
0
10,760


The Longer the cable the worst the signal to be honest at that length the difference in speed of wireless and the cable will be minimal. It probably would be better to get a network node to extend the length of the wireless network.
The Doctor
 

qbsinfo

Honorable
Jul 26, 2012
601
0
11,360
yes its fine. if you are able to get what is referred to CAT5e or cat5 enhance it will allow for the fastest signal your network connection from your computer to the router with the least amount of signal loss.

but since standard cat5 cable 100mbs transfer rate @ 100 meters and your router can hit a maximum of 150mbs - that would also be fine for a short run.
 
Solution

lady_bug

Honorable
Aug 25, 2013
10
0
10,510
Thank you for the fast reply, The _Doctor. I regret buying this 3g router for i could not get a better signal downstairs so I went back to using a strainer covered with aluminum foil as a wifi booster or antennae. I kept the router... might sell it soon.
 


Cat 5 or 6 cable is good to about 100m or 300 ft. when installed properly.
The distance you are running is negligible as long as you do not have any kinks or 110/220 electrical lines running along or crossing it.
You should not see any speed difference with a cable that short.

 


Electrical cables are not a problem so long as they cross at 90 degrees and I've done runs well over 100M with Cat5 and Cat6 and not had any signal problems, I've used an entire 300M drum on a single run and had no signal problems.
 

qbsinfo

Honorable
Jul 26, 2012
601
0
11,360


they're making faster than 10mb NICs now ya know . . :ange:

 

lady_bug

Honorable
Aug 25, 2013
10
0
10,510


I already have this router http://www.amazon.co.uk/TP-Link-TL-MR3220-150Mbps-Wireless-Router/dp/B0043GWGV8/ref=pd_sim_sbs_ce_1/276-3437962-2357234.
 


What's that got to do with the price of fish?
 

qbsinfo

Honorable
Jul 26, 2012
601
0
11,360

it depends on what tea you're drinking.

you still rocking that 660ti SLI?
 

Of course.
 

lady_bug

Honorable
Aug 25, 2013
10
0
10,510

Yes, I am inserting a 3g dongle to my router but I cannot get a good signal downstairs. Because the ethernet cable is only 1 meter in length, it is impossible for me to bring my router upstairs while I'm working downstairs. (Reason why I cannot work upstairs: My dog is always barking at me. She wants me beside her all the time but she doesn't want to go upstairs)

Now, if I will buy a 5 or 7-meter ethernet cable and connect the router (upstairs) and desktop (downstairs), shall I have problems with the signal? Many said 'not really, It will be ok" so I will buy a cable tomorrow.

But what kind of ethernet cable should I buy? I checked some sites and they are giving different types of ethernet cable. What my router's ethernet cable shows "DATA CABLE CAT.5 UTP 26AWG 4 PAIRS AWM PUC 75°C EIA/TIA 568B

Sorry for being naive. You see, not all women are good in computers. However, I'm trying to learn. Thank you for helping me, guys!!
 

qbsinfo

Honorable
Jul 26, 2012
601
0
11,360
DATA CABLE CAT.5 UTP 26AWG 4 PAIRS AWN PUC 75°C EIA/TIA 568B

that says, hello! i need a category 5 (cat5) cable that is in pairs of 26 american wire gauge thick for the copper wires than are in 4 pairs (AWN PUC not sure about those, might have to do with being plastic or polymer coated??) that is rated to with stand 75° celsius by the american energy association/(TIA not sure which association that is) nor do i know what 568B is.

in short a cat5 cable . . .