New rig problems

DubplateOnly · Aug 28, 2013

Ok so installed new mobo and cpu about 2 days ago. worked fine, did a clean OS install as well. here a video that will hopfully help you get where im coming from. video explains most of it but if any other question please write back. http://www.youtube.com/watch?v=Z371dInPYTw

badboyrog · Aug 28, 2013

did you hear a beep on booting?
are you sure the psu is good ?
are you sure your memory are good ? and installed proprely.... dual channel mode....etc...
if none of above fix the problem.... just reinstall the cpu on his socket
let me know

Shaun o · Aug 28, 2013

With out much doubt the cool max Psu.
From what I saw of the Video it`s the problem if the voltages are too far out on the 12v 5v rails you get exactly what is happening in your video.

Try another PSU if you have a spare or a friend who can lend you one.
Also make sure the bios jumper pin on the board is set to the right position if cmos clear is bridged the system will also produce what you are seeing.

DubplateOnly · Aug 28, 2013

badboyrog :

It doesnt even get to the beep. But im confused on my why it worked fine initally 2days ago when i first pieced it together. Everything is installed correctly and double cheak my work and cheaking with the mobo manuel...this being my first build i thought i had everything good to go

DubplateOnly · Aug 28, 2013

Shaun o :

So are you saying its possibly not enough wattage thats causing this or coolmax in general are pieces of shit?

Shaun o · Aug 30, 2013

Cooler max can be a bit flaky. Mid range Psu.
So yes I would just test to see if it is the cause.

Even higher or better known brands can still slip through with faults on them.
But as a rule since it is the core component that drives everything else it`s a must to check.

Search

New rig problems

DubplateOnly

Honorable

Shaun o

badboyrog

Honorable

Shaun o

Illustrious

DubplateOnly

Honorable

DubplateOnly

Honorable

Shaun o

Illustrious

TRENDING THREADS

Latest posts

Moderators online

Share this page