Razer tiamat 7.1 wont work

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
Solution
Skeefers
Ok, I'm at a loss then. From what I've found online, the headset should work fine in stereo mode as long as the controller isn't set to 7.1 mode. It should work fine in XP, and doesn't require any drivers either. I'm at a loss as to what could be causing this issue. The only thing I can think of to do is to double-check that everything is firmly plugged in and that they're in the correct place, and to try pressing the 7.1 button and see if it turns any colors other than green and red (if so, see what happens when it's the other colors, and if not then leave it on red).
Sort by date Sort by votes
Skeefers

Skeefers

Honorable
Aug 7, 2013
518
0
11,360
Is the 7.1 mode light on the controller turned on? If so, the 2 channel mode won't work, so make sure that light is off (bottom right button on the controller) and then turn up the volume and see what happens.

Edit: You'll also need to select Main Volume on the controller before turning it up.
 
Upvote 0 Downvote
Skeefers

Skeefers

Honorable
Aug 7, 2013
518
0
11,360
Ok, I'm at a loss then. From what I've found online, the headset should work fine in stereo mode as long as the controller isn't set to 7.1 mode. It should work fine in XP, and doesn't require any drivers either. I'm at a loss as to what could be causing this issue. The only thing I can think of to do is to double-check that everything is firmly plugged in and that they're in the correct place, and to try pressing the 7.1 button and see if it turns any colors other than green and red (if so, see what happens when it's the other colors, and if not then leave it on red).
 
Upvote 0 Downvote
Solution
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom