Looking for liquid cooling for EVGA P67 SLI mobo

Solution


TJ, sorry for the late response. Been up to my neck with a friends PC problem which should be fixed today.
As I said earlier, just about any of the closed loop liquid systems will work with your board. All of them, as far as I know, come with mounting hardware for both Intel and AMD processors (sockets).
Your case, however, probably will NOT support the larger radiators (200++mm) such as the H100 or H110 from corsair. Therefore, I would recommend something along the lines of the Corsair H80 or H80i if you want dual fans (push-pull arrangement), or the H60 type coolers for a single fan cooling system.
I am using an older H50 with 2 fans, mounted on the back...


TJ, sorry for the late response. Been up to my neck with a friends PC problem which should be fixed today.
As I said earlier, just about any of the closed loop liquid systems will work with your board. All of them, as far as I know, come with mounting hardware for both Intel and AMD processors (sockets).
Your case, however, probably will NOT support the larger radiators (200++mm) such as the H100 or H110 from corsair. Therefore, I would recommend something along the lines of the Corsair H80 or H80i if you want dual fans (push-pull arrangement), or the H60 type coolers for a single fan cooling system.
I am using an older H50 with 2 fans, mounted on the back of the case, with the fans pulling cool air into the case over the radiator. My top fan is an exhaust. It works really well.
 
Solution