Hello,
I've decided to make this thread since 1 hours of google searching about the topic found nothing really relevant.
All of a sudden, my Samsung LCD ( Model S24A300H ) decided to stop working. By stop working I mean it seems to be unable to connect back to the default mode. It only offers me HDMI mode, although I have it set up on a regular cable, not HDMI, if I try to hit the source button and change the code it just goes pitch black.
I tried opening it along with the PC, leave it closed and connect it after the PC has started, nothing worked, it just seems completely unable to change back to the analog mode. I cannot access the Menu option at all, except if I completely disconnect it from the PC, open it then and it will not give me a single option on the menu except Setup&Reset which then only has PC/AV mode highlighted but non-modifiable.
Any thoughts or suggestions? I would prefer trying to figure this out on my own given as how the warranty on it expired just earlier this month ( my luck ). I also must mention that it gave absolutely no signs of any bad behavior for 1+ years until I came back from a vacation and just wouldn't display anything. The problem is limited to the monitor itself, I plugged in an older monitor on the same cable I use for this one and this second one works.
I've decided to make this thread since 1 hours of google searching about the topic found nothing really relevant.
All of a sudden, my Samsung LCD ( Model S24A300H ) decided to stop working. By stop working I mean it seems to be unable to connect back to the default mode. It only offers me HDMI mode, although I have it set up on a regular cable, not HDMI, if I try to hit the source button and change the code it just goes pitch black.
I tried opening it along with the PC, leave it closed and connect it after the PC has started, nothing worked, it just seems completely unable to change back to the analog mode. I cannot access the Menu option at all, except if I completely disconnect it from the PC, open it then and it will not give me a single option on the menu except Setup&Reset which then only has PC/AV mode highlighted but non-modifiable.
Any thoughts or suggestions? I would prefer trying to figure this out on my own given as how the warranty on it expired just earlier this month ( my luck ). I also must mention that it gave absolutely no signs of any bad behavior for 1+ years until I came back from a vacation and just wouldn't display anything. The problem is limited to the monitor itself, I plugged in an older monitor on the same cable I use for this one and this second one works.