Windows 7 installed wrong, please help!

ignasx123

Honorable
Apr 3, 2013
58
0
10,630
Hello, i have a little problem , when i was installing windows7, i have 1tb HDD and in the instalation i presses new, and i went down from 1tb to 500gb, cuz i though that will make C and D disks in my computer. But no, when i came to the my computer there is just disk D and its 500Gb, i installed them incorrecttly, i just need to know how can i reinstall them? In youtube all videos show how to install windows from dvd, i dont have dvd room so i installed these windows from usb. But how can i reainstall them, so i can get 1t?

Short version - When i installed windows7 i didnt used the maximum - 1tb HDD memorie, i only used half of it - 500gb.
How can i reinstall and use full memorie, no dvd, only usb? I dont have DVD room.


PLease help, thank you.
 
Solution
First of all it depends on if you created a boot able image of the windows install files correctly on the usb drive.

You will need to do this in order to boot from the usb memory stick to install windows setup.
If you have done this right.
Then it is simply a case of going into the bios of your motherboard and in the bios where it says list off boot devices or boot order setting the usb memory stick first in the list. once done save the setting in the bios before exiting it.

First of all it depends on if you created a boot able image of the windows install files correctly on the usb drive.

You will need to do this in order to boot from the usb memory stick to install windows setup.
If you have done this right.
Then it is simply a case of going into the bios of your motherboard and in the bios where it says list off boot devices or boot order setting the usb memory stick first in the list. once done save the setting in the bios before exiting it.

 
Solution