http://products.xfxforce.com/en-us/Graphics_Cards/AMD_Radeon%E2%84%A2_HD_7850/FX-785A-ZNBR
I have been using MSI Afterburner to OC the card, so far I have achieved 1050 core, 1250 mem, w/20% power slider up and no voltage changes. When I hit 1300 on the mem the card crashes, do I need to bump the voltage at this point or just leave it. Since the 13.4 AMD CCC Update the voltage control had gone away so I will need an external program to control the voltage so any suggestions there would be helpful too.
Current System:
CPU: Phenom II x6 1065T w/Cooler Master Hyper TX3 with 2 fans
RAM:16GB 1333 G.Skill RipJaws
GPU:XFX Radeon R7850 Ultra OC Edition 1GB w/ARCTIC Accelero TT II VGA Cooler
MOBO:MSI NF750-G55
PSU:Cool Power Gamer Pro CP-GP775 775W
CASE:Antec 300 3x120mm intake fans 2 on front one on door over gpu, 1x120mm exhaust back, 1x140mm exhaust top so I have zero cooling issues with the cpu staying under 35c under load and gpu 55c under load on a 80f+ day inside
I have been using MSI Afterburner to OC the card, so far I have achieved 1050 core, 1250 mem, w/20% power slider up and no voltage changes. When I hit 1300 on the mem the card crashes, do I need to bump the voltage at this point or just leave it. Since the 13.4 AMD CCC Update the voltage control had gone away so I will need an external program to control the voltage so any suggestions there would be helpful too.
Current System:
CPU: Phenom II x6 1065T w/Cooler Master Hyper TX3 with 2 fans
RAM:16GB 1333 G.Skill RipJaws
GPU:XFX Radeon R7850 Ultra OC Edition 1GB w/ARCTIC Accelero TT II VGA Cooler
MOBO:MSI NF750-G55
PSU:Cool Power Gamer Pro CP-GP775 775W
CASE:Antec 300 3x120mm intake fans 2 on front one on door over gpu, 1x120mm exhaust back, 1x140mm exhaust top so I have zero cooling issues with the cpu staying under 35c under load and gpu 55c under load on a 80f+ day inside