Sign in with
Sign up | Sign in
Your question
Solved

will this cooler be enough for a 4.3-4.5ghz a8 5600k

Last response: in Overclocking
Share
September 4, 2013 9:39:09 AM

http://www.deepcool-us.com/product/ICEBERG_PRO. im planning to buy that and i wonder if thats okay for a 4.3ghz. thanks and if not please tell me what specs should i look for a cooler thanks

More about : cooler 5ghz 5600k

a b K Overclocking
September 4, 2013 12:37:30 PM

It meets the specs and will be a vast improvement over the stock cooler. The top end temps it will maintain will depend on several other factors like case size, air flow, ambient temp, etc. Have you looked into the CM Hyper 212 EVO? http://www.amazon.com/Cooler-Master-Hyper-212-RR-212E-2...
It has 4 heat pipes instead of 3 and they are larger, and it has a larger 120mm fan... if you have the room.
September 4, 2013 5:49:15 PM

clutchc said:
It meets the specs and will be a vast improvement over the stock cooler. The top end temps it will maintain will depend on several other factors like case size, air flow, ambient temp, etc. Have you looked into the CM Hyper 212 EVO? http://www.amazon.com/Cooler-Master-Hyper-212-RR-212E-2...
It has 4 heat pipes instead of 3 and they are larger, and it has a larger 120mm fan... if you have the room.


how about this? i cant find the one you posted here in the philippines

http://www.deepcool-us.com/Product/GAMMAXX400/

my case is aerocool v3x. i have 1 120mm fan at the front. 2 at the side and 1 80mm at the back

thanks!
Related resources
a b K Overclocking
September 4, 2013 7:55:57 PM

If you can't get the 212 EVO, then get any of the Deepcool models you like best. The APU isn't all that hard to cool.
September 4, 2013 8:42:26 PM

clutchc said:
If you can't get the 212 EVO, then get any of the Deepcool models you like best. The APU isn't all that hard to cool.


hi im having 2nd thoughts on getting a 120mm fan because of the size of my casing and how close the cooler will be on my ram cause the heatsink of my ram is high. can you please tell me how to identify a good 92mm fan. when i look at the spec of the air flow rpn etc i can only see numbers and dont know how to translate its effectiveness thanks!

Best solution

a b K Overclocking
September 5, 2013 6:41:10 AM
Share

The fan's CFM is not as important as the heat sync's design, heat pipe size, and radiator. I would go here and do a little reading about coolers. Maybe get a few ideas of what is good and what is not... and then see what is in your area:
http://www.frostytech.com/
September 5, 2013 7:49:25 AM

clutchc said:
The fan's CFM is not as important as the heat sync's design, heat pipe size, and radiator. I would go here and do a little reading about coolers. Maybe get a few ideas of what is good and what is not... and then see what is in your area:
http://www.frostytech.com/


thanks!
!