Water Cooling Set-Up

GMPoisoN

Honorable
Mar 13, 2013
505
0
11,010
I'm going to be water cooling my Corsair 350D. I was originally planning on just have one slim 240 rad on the top, but I'm going to now be water cooling my gpu as well, so I would really like to have a second rad. I'm going to be using the same 150 reservoir as in the picture, I'm just worried about spacing issues:

500x1000px-LL-1ba360e0_DSC_0160.jpeg


As you can see he does fit 2 radiators in there along with the tube reservoir. I'm just worried that without that special pipe he has along side of the rad I won't be able to fit. My loop will be Reservoir > Pump > Front Radiator > CPU Block > Top Radiator > GPU Block > Reservoir. It also looks like he is using an XSPC block, but it looks very short, mine will be the 770 XSPC block. In the picture above it looks like it fits, but in this picture, it looks like there would be 0 room for a tube reservoir:

900x900px-LL-e0eca3a8_DSC00359.jpeg


I'm willing to stick with 1 rad on top if it means I can't fit in the tube reservoir, but if any of you have done what I'm describing, please let me know how it all turned out.
 
Look at the dimensions of your card and decide off that if you will have room. Any blocks for the card will be as long or probably smaller in length than the card itself. I would think that first image has something like a 670, which has a very short PCB, while the 2nd would be something like a 7970.
 

GMPoisoN

Honorable
Mar 13, 2013
505
0
11,010


Well I was going to go with the XSPC Raystorm 240, but I love the look of the tube reservoir so much Im willing to go single radiator on top just to have one.