Sign-in / Sign-up
Your question
Solved

Where does the power led, reset sw, hdd led power sw go on a Gigabyte GA-Z87X-UD3H Motherboard?

Tags:
  • Motherboards
Last response: in Motherboards
September 5, 2013 7:33:35 PM

Can someone please help me with this? I have wired my computer, but need to know where I put these small cables. They are the smallest cables in the case and I have no connections for them. All my case fans, hhd, ssd are hooked up to the power supply. I didn't have the 4 pin connectors to run the fans off the mobo.

More about : power led reset hdd led power gigabyte z87x ud3h motherboard

a c 425 V Motherboard
September 5, 2013 7:43:30 PM

I dont have a copy of your MoBo manual....there are instructions with pictured inside
m
0
l

Best solution

September 5, 2013 9:01:10 PM

http://download.gigabyte.us/FileList/Manual/mb_manual_g... page 29 on manual. Its on the bottom right says F_Panel. Its fine connecting the case fans to psu it'll just run full speed or you can buy a fan controller. You should be fine connecting the fans to the MB too if you want I think it just wont be adjustable either.
Share
Related resources
September 5, 2013 9:07:41 PM

I found it. Now the problem I am having is getting the computer to start. I plugged it in and flipped the switch the motherboard power light is orange and the graphics card light is green. The issue is when I hit the power button to turn on the computer it clicks one time and one LED fan blinks once then I get nothing else. I flipped the switch back off and then on again and it does the same thing. Anybody have a clue as to what may cause this? IMO it seems like it is trying to start, but something is holding it back. It reminds me of a dead car battery when the key is turn and you get one click and then nothing.
m
0
l
July 12, 2015 9:34:00 AM

check to see your motherboard cables are all in tightly, sometimes they are hard to get in, its the big 24 pin
m
0
l
a c 425 V Motherboard
July 12, 2015 3:44:17 PM

I think he figured it out by now since the problem is now almost 2 years old
m
0
l
December 23, 2015 1:40:10 PM

JackNaylorPE said:
I think he figured it out by now since the problem is now almost 2 years old


Lol
m
0
l