Hi to all, have a Western Digital My Book Essential and the other day there was a severe thunderstorm and my WDMB was connected to a TV via USB. There was a power outage and probably a surge. Now the WDMB is recognised in "Devices" as My Book 1130. I can't get any data from it and have run a search and this is the result.
---===>Device Information<===---
*!*ERROR: no String Descriptor for index 2!
ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High
Device Address: 0x01
Open Pipes: 2
===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x84 -> Direction: IN - EndpointID: 4
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00
===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x03 -> Direction: OUT - EndpointID: 3
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0210
bDeviceClass: 0x00 -> This is an Interface Class Defined Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x1058 = Western Digital Technologies, Inc.
idProduct: 0x1130
bcdDevice: 0x1016
iManufacturer: 0x01
*!*ERROR: no String Descriptor for index 1!
iProduct: 0x02
*!*ERROR: no String Descriptor for index 2!
iSerialNumber: 0x03
*!*ERROR: no String Descriptor for index 3!
bNumConfigurations: 0x01
I would be extremely grateful for a fix as there are lots of family photo's on it.
---===>Device Information<===---
*!*ERROR: no String Descriptor for index 2!
ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High
Device Address: 0x01
Open Pipes: 2
===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x84 -> Direction: IN - EndpointID: 4
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00
===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x03 -> Direction: OUT - EndpointID: 3
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0200 = 0x200 max bytes
bInterval: 0x00
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0210
bDeviceClass: 0x00 -> This is an Interface Class Defined Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x1058 = Western Digital Technologies, Inc.
idProduct: 0x1130
bcdDevice: 0x1016
iManufacturer: 0x01
*!*ERROR: no String Descriptor for index 1!
iProduct: 0x02
*!*ERROR: no String Descriptor for index 2!
iSerialNumber: 0x03
*!*ERROR: no String Descriptor for index 3!
bNumConfigurations: 0x01
I would be extremely grateful for a fix as there are lots of family photo's on it.