Sign-in / Sign-up
Your question
Solved

Quadro FX 580, Computer Fails to Boot

Tags:
  • Quadro
  • Computers
  • Boot
  • Motherboards
  • Graphics
  • Asus
Last response: in Graphics Cards
September 8, 2013 4:02:40 PM

Okay. So my PC is a custom built ASUS p5g41t-m lx plus mother board. It's got an Intel Dual Core CPU. With 4 gigs of RAM. I have a CD Drive and 5 hard drives running all at once. I got a Quadro FX 580 and I throw it on, but when I do, the computer won't do anything when I turn it on. Also, while i'm thinking about it. The PSU says the "OUTPUT WATTS 400W, +5V, +3. 3V: 120WATTS". But anyway the problem in detail is, The computer works fine with the On-board graphics. But when I plug the FX 580 in, the computer will just idol, the screen doesnt do anything. I plug the screen into the onboard while the graphics card is plugged in, still nothing. I take the graphics card out, it will work just fine. Any suggestions here? Anything I should try? I also think my firmware on my motherboard is up to date as well.

More about : quadro 580 computer fails boot

Best solution

a c 4215 V Motherboard
a c 2241 Ĉ ASUS
September 8, 2013 7:16:12 PM

The 580 calls for a 450 PSU if I remember right (and I'd look for one that runs 450 continuous) many PSUs advertise their voltage at Peak, rather than continuous so while it might be a 400, if that's peak, then continuous my be 300 or so
Share
September 9, 2013 9:39:07 AM

Tradesman1 said:
The 580 calls for a 450 PSU if I remember right (and I'd look for one that runs 450 continuous) many PSUs advertise their voltage at Peak, rather than continuous so while it might be a 400, if that's peak, then continuous my be 300 or so


DUDE THANK YOU!!! You just saved me a headache and a lot of time.
m
0
l
a c 4215 V Motherboard
a c 2241 Ĉ ASUS
September 9, 2013 5:22:10 PM

No problem, let us know how it goes, and can prob go ahead and close the thread
m
0
l