Sign in with
Sign up | Sign in
Your question
Solved

New Built PC wont work

Last response: in Systems
Share
September 9, 2013 3:03:44 PM

My new PC wont work. When I turn on the power switch, none of the fans are responding. Right now there is no graphic card or monitor yet because it is being shipped. I'm fear that one of the parts might be damage so if anyone can please help me, I would VERY MUCH be appreciated!

Motherboard: Msi Z87-G45 Gaming

Processor: Intel I5 4670k

Power Supply: Corsair CX750

RAM: Corsair Vengeance 8 GB (2 x 4 GB)

HDD: Seagate 1TB

SSD: Samsung Pro 128GB

The graphic card that is shipping is: Sapphire Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card

If anything else,
Case: Cooler Master HAF-XM

More about : built wont work

a b C Monitor
a c 106 U Graphics card
September 9, 2013 3:14:34 PM

Most important thing, make sure the power button from your case is correctly connected to the motherboard. You'd be surprised how easy it is to put that one pin over and have everything not work. Next make sure your PSU is properly connected to your motherboard. Forcing an 8-pin GPU PSU connector (the 6+2 pin connector) into the motherboard would be very bad for example :D . Make sure you have the 8-pin for the motherboard from your PSU properly connected.
m
0
l
a b C Monitor
a c 106 U Graphics card
September 9, 2013 3:18:16 PM

Also make sure your RAM is properly inserted. You may want to test it with one stick at a time and try different slots just to be sure it isn't the RAM or the RAM slot
m
0
l
Related resources
September 9, 2013 3:30:48 PM

I did what u told me, recheck the wires to the mobo and reinstall the ram. Nothing working so far :c
m
0
l

Best solution

a b C Monitor
a c 91 U Graphics card
September 9, 2013 3:35:11 PM

If you're not getting any response whatsoever and you're wiring is correct to the mobo header, check the power switch on the back of the PSU, i've gotten one before that came out of the box in the off position.
Share
September 9, 2013 3:39:57 PM

The switch with the " I and O"? I switch both of them, nothing on :c
m
0
l
!