Sign in with
Sign up | Sign in
Your question
Solved

Installing the MSI Z87-G41: too many standoffs

Last response: in Motherboards
Share
September 9, 2013 5:51:01 PM

Hey,
I recently bought a msi z87-g41 motherboard, and looked at the mounting holes so I could be ready to install it. The motherboard is a full atx board, so I expected that it would be ready to be mounted on to 9 standoffs, but the board only has 6 holes for the standoffs. The holes are only for the two rows of standoffs closest to the i/o shield, and the third row would be under my board with no holes to go through. Do I take the third row of standoffs out and install the motherboard, or do i have to worry about the board touching the case???

Best solution

September 9, 2013 6:06:55 PM

yes remove the extra standoff's.
Share
a c 207 V Motherboard
September 9, 2013 6:13:37 PM

It's not a very wide board. See page 1-16 of your manual.
m
0
l
!