Sign in with
Sign up | Sign in
Your question

How Can I Boot From USB Drive On A "HP P2-1334" ? *Solved*

Last response: in Windows 8
Share
September 12, 2013 2:05:54 PM

When I Go To The Boot Menue The USB Does Not Show Up, Thanks In Advance For Any Help




*Update*

The Usb I Was Using Was Not Being Recognized I Used Another one And It Worked

-Brian
a b * Windows 8
September 12, 2013 2:20:09 PM

Windows does not like to be booted from USB... try Linux.
a b * Windows 8
September 12, 2013 2:28:28 PM

@ Anonymous1 - Talking complete bollocks !


Hold down the ESCAPE key when you power ON the computer until a menu is shown
Go into the Computer Setup
Go to the Security Menu, and Secure Boot Configuration
Enable Legacy Support
Disable Secure Boot
Disable Fast Boot
Press F10 to save your settings
Go to the File Menu and select Save Changes and Exit

Now you should be able to install Windows 7/8/Linux. Insert the disc/usb, hold ESCAPE and boot the machine again. You can now go to the boot menu and select the USB/DVD-ROM drive to boot from. Follow the normal steps for installing OS.
Related resources
September 12, 2013 2:32:23 PM

What exactly are you trying to do? The previous answer describes pretty much what you need to do, I personally use powerISO to create bootable flash drives if you need help doing that part of it.
September 12, 2013 2:56:06 PM

burdenbound said:
What exactly are you trying to do? The previous answer describes pretty much what you need to do, I personally use powerISO to create bootable flash drives if you need help doing that part of it.



Im Trying To Boot From A Bootable DOS Usb To Flash the Sectors On A 320gb HDD. This will Allow Me To Use It As A Xboix 360 Hard Drive. Dont Think It's Possible? Click Here
September 12, 2013 2:57:42 PM

das_stig said:
@ Anonymous1 - Talking complete bollocks !


Hold down the ESCAPE key when you power ON the computer until a menu is shown
Go into the Computer Setup
Go to the Security Menu, and Secure Boot Configuration
Enable Legacy Support
Disable Secure Boot
Disable Fast Boot
Press F10 to save your settings
Go to the File Menu and select Save Changes and Exit

Now you should be able to install Windows 7/8/Linux. Insert the disc/usb, hold ESCAPE and boot the machine again. You can now go to the boot menu and select the USB/DVD-ROM drive to boot from. Follow the normal steps for installing OS.


Did That And Still It Does Not List The Usb In The Boot Menu
!