- Aug 30, 2013
- 40
- 0
- 10,540
hi guys im in a dilema i was trying to put together a pc for myself but i didnt boot up only booted for half a second just a flash on the hd gpu cpu
im not sure if its the psu or motherboard i removed the ram gpu and left the cpu in there but still same problem mb ram and cpu is new.
my psu and gpu is from old computer
RAIDMAX RX-500S 500W ATX12V
cpu - i5 2500k
gpu -gtx 9800
mb - GA-P67A-UD3-B3 (rev. 1.x)
Intel® P67 Chipset
i dont know if it might be the psu cause the power connector need 2x4 12v and i only had 1x4pin available so i tried mixing 6pin with a 2pin and i think another 4 pin with the 4pin that didnt work either is there anyway to solve im a lost soul
im not sure if its the psu or motherboard i removed the ram gpu and left the cpu in there but still same problem mb ram and cpu is new.
my psu and gpu is from old computer
RAIDMAX RX-500S 500W ATX12V
cpu - i5 2500k
gpu -gtx 9800
mb - GA-P67A-UD3-B3 (rev. 1.x)
Intel® P67 Chipset
i dont know if it might be the psu cause the power connector need 2x4 12v and i only had 1x4pin available so i tried mixing 6pin with a 2pin and i think another 4 pin with the 4pin that didnt work either is there anyway to solve im a lost soul
Facebook
Twitter
Instagram