Hi guys. I just finished my new build. Specs:
amd fx6300
msi 7950
2 x 4gb 1600mhz RAM
500w corsair PSU
I can't get my ACER 21.6" monitor to display. It displays when plugged into my laptop, but the rig wont display. When I plug it into the Motherboard or the GPU (which is powered, fans are spinning) it just says No Signal. Also, there's no post beep from my Mobo even though a speaker is connected. When I first installed everything and booted, i did have problems because it wasnt even turning on, but I reinstalled the processor and it worked. However, i can't get to BIOS because monitor wont show anything. Whats wrong with it? I unplug my RAM to see if BIOS is properly checking for memory, and there are lots of short beeps.
amd fx6300
msi 7950
2 x 4gb 1600mhz RAM
500w corsair PSU
I can't get my ACER 21.6" monitor to display. It displays when plugged into my laptop, but the rig wont display. When I plug it into the Motherboard or the GPU (which is powered, fans are spinning) it just says No Signal. Also, there's no post beep from my Mobo even though a speaker is connected. When I first installed everything and booted, i did have problems because it wasnt even turning on, but I reinstalled the processor and it worked. However, i can't get to BIOS because monitor wont show anything. Whats wrong with it? I unplug my RAM to see if BIOS is properly checking for memory, and there are lots of short beeps.