HD video playback choppy

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530
I have a problem watching hd video on my computer. Sound is always ahead of picture. It's very choppy. Was wondering what I need to upgrade. I think maybe need a new video card. Thanks in advance

Specs
Windows vista home premium
AMD Athlon dual core 4050 2.1 ghz
3gb of ram
GeForce 6200se turbo cache
 
You might be able to get an agp card. Does your motherboard have an agp slot?

EDIT*

Just checked all the available agp cards, and none would be a suitable upgrade. The only way you could upgrade is if somehow your motherboard had a pci-e slot.
 

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530


Not sure what slot I have but here's a pic of where my video card is now
0D55D5B2-E045-450E-88EB-209892144F47-23965-00001B0EEBD837DD_zpsace1fc1b.jpg
 

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530


I would like to keep as cheap as possible with best results. Maybe upgraded computer in year or two. I would prefer it has VGA and a hdmi cuz I'm running a splitter currently to my HDTV.
Age is around 2008 thats whats on psu tage(pic below)Also your saying just video card upgrade is what I need?

3D10382A-5A65-4993-B193-75BED0EBA1D0-24090-00001B278710268A_zpsa5eca657.jpg
 
Newer video cards take the load off the cpu and handle most of the video playback(on software that can take advantage of this feature).

Something like the AMD HD7730(Or Nvidia equivalent like a GT640 that is faster than the DDR3 version of the 7730) should work on your power supply while still giving you good overall performance.

You can get by with much less if needed, just ensure it is a modern card AND it does not need extra power(I doubt you have the 6 pin pci-e connector on your system.). Your cpus extremely low power consumption just helps leave you more power for a video card :)
 

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530
We'll put card in computer and nothing won't power up complelty dead. So went back to old card and same. So I tried different power supply and turned on. I guess should have read box card needed minimum off 400 psu. So guess I smoked psu
 
I am surprised that you managed to kill your power supply with such a card.

It is just a slightly upgraded 4350(takes more power) and I ran one of those fine on a 300 watt power supply(keep in mind that brings up the current to 22amps on the 12 volt rail) on a system with a more power hungry cpu(and gpu). To this day that same system has a GTX 650 ti and had a 5770 at least 2 years as well. I have also been unable to break 180(171 with GW2 hammering the 650 ti 100% and prime eating up almost all the rest of the cpu power) watts at the wall with that system.

I would have the guess that power supply was weak from the start.
 


The new graphics card should only have been able to cause damage to your psu if you were putting a load on it. If your power supply failed on you before even attempting to test it, the psu was bound to fail and it is obvious that your power supply was was very low end.

Some companies put inaccurate information on the psu label and many more just make cheap psus. You have a case of that and it's a pretty bad issue as the psu is already the top component to fail in a computer.

I would recommend that get a spare psu you have around ( if possible). Remove the new graphics card and test the system with the old one. Make sure the system boots up. Hopefully it does and your psu didn't destroy anything else when it died.
 

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530
Well my buddy owns a local junkyard. Went there he had a Antec tower with 430w psu and fans fully loaded with hd and all. I put all my guts into that tower and got powered back up. But now cant get the video card to work. I put it and put cd rom in and after install i view log and it says driver install failed. I went to amd website and tried downloading from there and same. When I click on the amd vision engine I get warning"No amd graphics driver is installed, or the amd driver is not functioning properly. Please install the amd driver appropriate for your amd hardware" im kinda stuck there but atleast I got it running
 
Uninstall the old drivers and then try again.

If it fails, the manual way(from devmgmt.msc) may be an option.

Check here
http://www.tomshardware.com/answers/id-1781859/catalyst-control-center-detect-driver.html

And use the drivers from here if you are on Vista 64 bit
http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_vista64.aspx

Here for 32(page seems down at the time. If you have the 32 bit version, let us know. I am sure a mirror can be found)
http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_vista32.aspx
 

Ribsyj

Honorable
Sep 15, 2013
38
0
10,530
I uninstalled drivers and tried that download do the 32 and nothing. The only thing under display adapters is the standard VGA display on my motherboard. I'm gunna try disabling that and reinstall. If not gunna clear all programs and drivers and remove and reinstall card and try that.