Solved Will a single 360mm rad be enough for an 8350 at 5ghz and an OCed 7970? Tags: Overclocking Last response: September 17, 2013 2:14 PM in Overclocking Share Shawn221 September 17, 2013 2:00:56 PM Yes or no? More about : single 360mm rad 8350 5ghz oced 7970 Reply to Shawn221 Uther39 a b K Overclocking September 17, 2013 2:06:12 PM I would say not, dont get me wrong it will cool it but you will need push pull and the fans up high, what case are you using? Reply to Uther39 Shawn221 September 17, 2013 2:08:59 PM Uther39 said:I would say not, dont get me wrong it will cool it but you will need push pull and the fans up high, what case are you using? I'm using the NZXT Switch 810 Reply to Shawn221 Can't find your answer ? Ask ! Get the answer Best solution Uther39 a b K Overclocking September 17, 2013 2:14:33 PM OK, good case, what pump will you be using, here have a look at this and try for this kind of set up, 360 in the top and 240 in the bottom, that way you have plenty of cooling and can lower those fan speeds. Reply to Uther39 Ask the community Post an answer Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !