Solved

COOLER MASTER Hyper 212 EVO

hi,
is this COOLER MASTER Hyper 212 EVO will fit and compatible in my Asus m5a97 R2.0 and AMD FX-6300?
any heatsink suggestion is welcome..
thank you..
http://www.newegg.com/Product/Product.aspx?Item=35-103-099&SortField=0&SummaryType=1&Pagesize=25&PurchaseMark=&SelectedRating=-1&VideoOnlyMark=False&VendorMark=&IsFeedbackTab=true&Keywords=%28keywords%29&Page=1#scrollFullInfo
7 answers Last reply Best Answer
More about cooler master hyper 212 evo
  1. As long as you have low profile ram it's a great cooler for you, and compatible with your components.
  2. SR-71 Blackbird said:
    As long as you have low profile ram it's a great cooler for you, and compatible with your components.

    +1!

    What case are you using, BTW? Height clearance can also be an issue with smaller cases.
  3. this is my memory G.Skill sniper
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231460

    this is my motherboard NZXT Phantom 410 mid tower case
    http://www.newegg.com/Product/Product.aspx?Item=N82E16811146087

    thank you..
  4. Height clearance regarding the case should be good. However, with your chosen memory you may need to move the fan to the other side of the heatsink. The fan will work on either side of the 212 EVO. Just make sure the air is exhausted out the rear of the case.
  5. you mean ill change the fan facing the rear case not facing the ram right?but my case has a rear fan.. should i take that off?
  6. Have fan on the EVO pushing air thru the heatsink towards your rear fan , don't remove rear exhaust fan.
  7. Best answer
    SR-71 Blackbird said:
    Have fan on the EVO pushing air thru the heatsink towards your rear fan , don't remove rear exhaust fan.

    +1. You keep both the rear exhaust fan and the one attached to the EVO. You want them both moving air in the same direction.
Ask a new question

Read More

Asus Heatsinks Components AMD Motherboards