Problem with HD7700 and Gigabyte GA-H61M-DS2

Toggle sidebar Toggle sidebar
D

DArby_UK

Honorable
Sep 21, 2013
4
0
10,510
I recently purchased a Zoostorm PC with GA-H61M-DS2-DVI motherboard which says it is PCI Express 3.0 compliant.

I have now purchased a Asus HD7700 graphics card and fitted an Antec 450W PSU.

As soon as i add power to the Asus card i get the little green light (red without power), and the PC will no longer boot up.

I get nothing from the DVI or HDMI ports on the card or from the inbuilt VGA port when the card is powered.

Something is happening as my Monitor recognizes that there is a powered HDMI cable connected from the PC as the source select icon changes but continually says no signal.

Im now at a loss - any suggestions appreciated.


Dean.

 
Solution
J
1: Remove the graphics card and restart and load into the BIOS by tapping delete



2: scroll over to BIOS features



3: Scroll to the very bottom of the page do the following:



1. Disable secure boot

2. Scroll up and set CSM to always

3. Change the OS type to Windows 8 not Windows 8 WHQL



4: Press F10 to save settings and exit, when it restarts shutdown the PC



5: Fit your graphics card, and then restart the PC.

This is the solution to your problem Darby
Sort by date Sort by votes
J

Jackiebrown

Honorable
Sep 22, 2013
2
0
10,520
1: Remove the graphics card and restart and load into the BIOS by tapping delete



2: scroll over to BIOS features



3: Scroll to the very bottom of the page do the following:



1. Disable secure boot

2. Scroll up and set CSM to always

3. Change the OS type to Windows 8 not Windows 8 WHQL



4: Press F10 to save settings and exit, when it restarts shutdown the PC



5: Fit your graphics card, and then restart the PC.

This is the solution to your problem Darby
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom