Sign in with
Sign up | Sign in
Your question

AMD Catalyst control center cannot be started

Last response: in Graphics & Displays
Share
September 24, 2013 7:58:44 AM

There are currentlu no settings that can be configured using AMD Catalyst Control Centre
I have win 8 :( 
I have 2 graphics card and my games run only with Intel HD 4000 instead of Amd radeon HD 8750
My CCC(Catalyst control center) Stop working while I added JustCause2_game.exe and JustCause2_Launcher.exe. After that my CCC didnt work, so i used the repair toll, that didnt work, i uninstalled and reinstalled with AMD remove tool i think.
Now i got this ... What to do ...
September 24, 2013 8:05:17 AM

It sounds like you need to select in your bios the video solution you want. CC will not work if the AMD video hardware is not selected as the one to be used by the system. Try going to your bios and confirm that the 8750 is selected as the device to use.
m
0
l
September 24, 2013 8:15:22 AM

How i do that? its aleardy activate, i can only chose uninstal or turn off (dezactivate)
m
0
l
Related resources
September 24, 2013 11:45:50 AM

Is your monitor plugged into the video card or the motherboard? Do you get an image when the monitor is attached to the video card? What 2 video cards do you have are you using both or one? What version amd driver are you using? Do you choose custom or atuo install when you install the driver package?
m
0
l
September 25, 2013 10:26:56 AM

Dogsnake said:
Is your monitor plugged into the video card or the motherboard? Do you get an image when the monitor is attached to the video card? What 2 video cards do you have are you using both or one? What version amd driver are you using? Do you choose custom or atuo install when you install the driver package?


I really suck at english and i understand only a half of what u say, My question is, if i Dezinstalate (delete) my intel HD 4000 my pc will crash or what?
whats the advantage of having 2 graphics cards? it wont get heat (hot) ?
I have a laptop... i got it with win8 and all things inside..
How do i get in bios on this laptop i cant go in with F2 or F9, F10, F11, F12... IM SO sadd
m
0
l
September 26, 2013 7:30:38 AM

Go to control panel/system/device manager/display devices and see if the radon device is listed. You may be able to select it there as the device to use. Have you updated your drivers? You need to tell us what your notebook make and model is. Go to the brands web page and try using the drivers they provide. Not knowing what hardware you have makes it hard to help at all.
m
0
l
!