I have the same mobo and processor, and I'm using Kingston HyperX Beast 2400MHz RAM (16GB in a 4x4GB configuration). It works great for me. I should note that the board will default to 1600MHz, so you will need to overclock the RAM to reach it's max potential (this is how it should work, as the board only supports 1600MHz without overclocking), but since the RAM is rated for the higher speed it won't cause you any problems. I let mine run at the default speed for a few days, then slowly incremented it up so I could monitor temps until I reached a level where I was comfortable with it, and haven't had any problems at all.